utilization of copper slag as a partial replacement of fine

(PDF) UTILIZATION OF COPPER SLAG AS A PARTIAL

The present study mainly focuses on investigating the effect of using copper slag as a replacement of fine aggregate on the strength properties. In this report, M25 grade concrete was used and tests were conducted for various proportions of copper slag replacement with sand of

More

UTILIZATION OF COPPER SLAG AS A PARTIAL

2016-11-8  The present study mainly focuses on investigating the effect of using copperslag as a replacement of fine aggregate on the strength properties. In this report, M25 grade concrete was used andtests were conducted for various proportions of copper slag replacement

More

Partial Replacement of Copper Slag as Fine Aggregate

2019-1-24  This project present the usage of copper slag for the partial replacement for fine aggregate the experimental procedure is conducted for the replacing percentage of 10%,15%,20%.for this above replacement percentage m25 grade concrete is used. the main objective of this project is to know the strength and durability of partial replaced concrete.to evaluate the strength and durability the various test were conducted.these resulted that the concrete strength is increased with addition of copper slag with concrete. Keywords — copper slag, concrete, durability, replacement,

More

Performance of Copper Slag on Strength as Partial ...

2018-1-29  It has been observed that up to 100 % replacement, copper slag can be effectively used as replacement for fine aggregate. The compressive strength increases with increase in percentage of combine mixes (copper slag and ferrous slag). copper slag is a

More

Effect of Copper Slag as a Partial Replacement of Fine ...

Copper slag is one of the materials that is considered as a industrial waste which can be used in construction Industry. This paper presents the results of an experimental investigation on the properties of concrete using copper slag as partial replacement of fine aggregate.

More

Use of copper slag as a replacement for fine aggregate in ...

2014-5-17  The use of copper slag as a replacement for fine aggregate in construction will reduce damage to the environment due to the waste resulting from the copper manufacturing process and help in saving natural resources. In this research, the use of copper slag as a replacement for fine

More

(PDF) Partial Replacement of Copper Slag as Fine

The concrete was prepared for the M20 grade concrete with partial replacement of fine aggregate by copper slag with various percentages of (0%, 5%, 10%, 20%, 30%, 40% and 50%). The specimens were casted for 7 days, 14 days and 28 days then tested the optimum value which provided the best performance was at 40% addition of copper slag for split tensile strength test.

More

Experimental Study on Concrete by Replacing Fine

2020-5-29  After a chemical, physical, mineralogical, and environmental characterization of copper slag, it is used as a – partial replacement of sand in concrete was investigated.

More

STRENGTH PROPERTIES OF CONCRETE BY THE

2016-12-21  Copper slag is a by-product obtained during the smelting and refining process in extracting copper metal from its ore. Copper slag is the one of the materials that is considered as a waste material and industrial passive material which could have been used in construction industry as partial replacement of fine aggregates in mixed design. Approximately about 2.2 tons of waste slag is generated for every 1 ton of metal production. Copper slag is a glassy granular material with high specific gravity. Particle sizes are of the order of sand and have a potential for the use

More

Strength and durability characteristics of conventional ...

2016-4-23  D.BRINDHA and S.NAGAN has studied on Utilization of Copper Slag as a Partial Replacement of Fine Aggregate in Concrete and they said that Sustainability and resource efficiency are becoming increasing important issues within today’s construction industry. The percentage replacement of sand by granulated copper slag were 0%,5%,10%,15%,20%,30%,40% and 50%. The compressive

More

Use of copper slag as a replacement for fine aggregate in ...

2014-5-17  The use of copper slag as a replacement for fine aggregate in construction will reduce damage to the environment due to the waste resulting from the copper manufacturing process and help in saving natural resources. In this research, the use of copper slag as a replacement for fine aggregate is investigated. Three

More

Experimental Study on Concrete by Replacing Fine

2020-5-29  The utilization of copper slag in concrete provides additional environmental as well as technical benefits for all related industries. Replacement of copper slag in fine aggregates reduces the cost of making concrete. Replacement of copper slag increases the self weight of concrete specimens to the maximum of 15 to 25%.

More

November 2016, Volume 3, Issue 11 JETIR (ISSN-2349

2018-6-19  Keywords: Copper Slag, Fine aggregate, Partial Replacement, M50 Grade Concrete, Workability, Compressive Strength, Flexural Strength, Split tensile Strength. I. INTRODUCTION Concrete is the most popular and most economical construction material. The production of concrete requires large quantities of materials.

More

Partial Replacement of Copper Slag as Fine Aggregate

2019-1-24  copper slag. Fig.7. Comparison of Flexural Strength of Beam IV. CONCLUSION The concrete was prepared for the M 25 grade concrete with partial replacement of fine aggregate by copper slag with various percentages of 0%, 10%, 15% and 20%. The specimens were casted for 7days, 14 days and 28 days then tested. The results are presented above.

More

Effect of Copper Slag as a Partial Replacement of Fine ...

Copper slag is one of the materials that is considered as a industrial waste which can be used in construction Industry. This paper presents the results of an experimental investigation on the properties of concrete using copper slag as partial replacement of fine aggregate.

More

USE OF COPPER SLAG AS FINE AGGREGATE AND

2010-1-31  Properties of concrete containing waste copper slag as a fine aggregate replacement. Proceedings of the 14th International Conference on Environmental Science and Technology, September 3-5, 2015, Rhodes, Greece. Mobasher, B., Devaguptapu, R., Arino, A.M., (1996). Effect of copper slag on the hydration of blended cementitious mixtures.

More

Strength and durability characteristics of conventional ...

2016-4-23  D.BRINDHA and S.NAGAN [29] has studied on Utilization of Copper Slag as a Partial Replacement of Fine Aggregate in Concrete and they said that Sustainability and resource efficiency are becoming increasing important issues within today’s construction industry. The percentage replacement of sand by granulated copper slag were

More

[PDF] STRENGTH PROPERTIES OF CONCRETE BY THE

An experimental investigation will be conducted to study the properties of concrete containing copper slag as a partial replacement of fine aggregates in the concrete mix design. Various durability tests will be conducted on such concrete of M40 and M50 grades to know the compressive strength, split tensile strength, flexural strength by ...

More

Study on the partial replacement of fine aggregate using ...

2014-1-9  Abstract: - This paper highlights the feasibility study on the utilization of induction furnace slag as an alternative for conventional fine aggregate. In this study the compressive strength characteristics of mortar and concrete made with partial replacement of fine aggregate using induction furnace slag was considered. For the

More

PERFORMANCE OF CONCRETE MADE WITH THE COPPER

2020-11-21  Replacement of fine aggregate by copper slag (%) 2 7th day Compressive strength (N/mm ) S-1 0 26.07 S-2 20 29.8 S-3 40 32.02 S-4 60 27.53 S-5 80 25.71 Table-6: Cube Compressive Strength of concrete with partial replacement of sand by Copper Slag at 28 days curing period Mix Designation Replacement of fine aggregate by copper slag (%) 28th day

More

November 2016, Volume 3, Issue 11 JETIR (ISSN-2349

2018-6-19  Keywords: Copper Slag, Fine aggregate, Partial Replacement, M50 Grade Concrete, Workability, Compressive Strength, Flexural Strength, Split tensile Strength. I. INTRODUCTION Concrete is the most popular and most economical construction material. The production of concrete requires large quantities of materials.

More

STRENGTH PROPERTIES OF CONCRETE BY THE

2016-12-21  varying proportions of copper slag with fine aggregates by 0%, 10%, 20%, 30%, 40% and 50% by weight. The obtained results will be compared with the conventional concrete, there by knowing the changes in the properties of concrete containing copper slag as a partial replacement of fine aggregates. I INTRODUCTION

More

Influence of Copper Slag in Concrete as Partial ...

2017-5-8  Influence of Copper Slag in Concrete as Partial Replacement for Fine Aggregate N. Vinoth Kumar1 S. K. Divya2 A. Sattainathan Sharma3 1,2,3Assistant Professor 1,2,3Department of Civil Engineering 1,2,3Valliammai Engineering College, Kancheepuram, India Abstract—Concrete is the widely used construction material.

More

[PDF] STRENGTH PROPERTIES OF CONCRETE BY THE

An experimental investigation will be conducted to study the properties of concrete containing copper slag as a partial replacement of fine aggregates in the concrete mix design. Various durability tests will be conducted on such concrete of M40 and M50 grades to know the compressive strength, split tensile strength, flexural strength by ...

More

Introduction: Experimental program: Cement Coarse ...

2016-3-16  Replacement of copper slag in fine aggregate reduces the cost of making concrete. References: [1] Brindha, D and Nagan, S (2010). “Utilization of copper slag as a partial replacement of fine aggregate”. International Journal of Earth Sciences and Engineering,Vol.3, No.4, pp.579-585 [2] Shi C, Meyer C, Behnood A.

More

PERFORMANCE OF CONCRETE MADE WITH THE COPPER

2020-11-21  Replacement of fine aggregate by copper slag (%) 2 7th day Compressive strength (N/mm ) S-1 0 26.07 S-2 20 29.8 S-3 40 32.02 S-4 60 27.53 S-5 80 25.71 Table-6: Cube Compressive Strength of concrete with partial replacement of sand by Copper Slag at 28 days curing period Mix Designation Replacement of fine aggregate by copper slag (%) 28th day

More

Effect of copper slag as a fine aggregate on the ...

2011-2-1  2.3.. Copper slagCopper slag used in this work was brought from Oman Mining Company, which produces an annual average of 60,000 tons. In preparation of cement mortars, the sand and copper slag particles used were those passing 850 μm and retained on 600 μm according to OS26-1981 .The copper slag was ground in the laboratory into a fine powder to the required size following the

More

A Study on Effective Replacement of Fine Aggregate

2015-5-1  A Study on Effective Replacement of Fine Aggregate using Copper Slag M. R. Amarnaath S. Jaya Pradeep ... utilization of high strength cements is necessary. Different types of cement have different water requirements to produce pastes ... Mixtures with 0% and 100% copper slag replacement gave the lowest compressive strength value of Approximately 30

More

Sustainability of Copper Slag as a Building Material

2020-7-3  Copper slag is one such sustainable material which has a promising future to be used as an alternative to river sand. This paper presents a study on finding the optimum dosage of copper slag (CS) for partial replacement of sand in concrete. Further, as part of durability study, the impact of elevated temperature of 200, 400 and 600 °C for 12 h ...

More

Stabilization characteristics of copper mine tailings ...

2016-1-25  This paper presents the feasibility of incorporating copper mine tailings (MT) as a partial substitute for cement in the development of concrete. The copper mine tailings used for this study have been accumulating for several decades at the tailings dump of Hindustan Copper Ltd. at Khetri, Rajasthan. Hence, alternative uses of MT need to be thought while keeping in mind that the utilization ...

More

Influence of Copper Slag in Concrete as Partial ...

2017-5-8  Influence of Copper Slag in Concrete as Partial Replacement for Fine Aggregate N. Vinoth Kumar1 S. K. Divya2 A. Sattainathan Sharma3 1,2,3Assistant Professor 1,2,3Department of Civil Engineering 1,2,3Valliammai Engineering College, Kancheepuram, India Abstract—Concrete is the widely used construction material.

More

Copper Slag Partially Replaces Fine Aggregate in M 25 ...

2020-4-2  partial alternative for fine aggregate where its world annual generation is about 33 million tonnes. The project look through the use of copper slag as partial replacement to M sand and natural sand for the designed M 25 grade mix concrete. compressive strength

More

Experimental Investigation on Partial Replacement of ...

2020-5-6  cement by 0%, 10% and 20% in concrete. Copper slag is used as a partial replacement for fine aggregate by 0%, 10%, 20%, 30%, 40% and 50%. Compressive strength, split tensile strength and flexural strength are strength parameters studied in this paper experimentally for various combinations of silica fume and copper slag content in concrete.

More

Comparison of The Replacement of Natural Sand by

2018-9-24  strength properties and effects of copper slag as partial replacement of fine aggregate in concrete. The Two different types of concrete grades M30 M40 were used with different percentage of copper slag replacement from 0 to 100 percentages. The percentage replacement of sand was 0%, 10%, 20%, 30%, 40%, 50%, 60%, 80% 100%. The

More

Research Paper To Study the Performance of Copper Slag

2020-3-5  To Study the Performance of Copper Slag As Partial or Fully Replacement to Fine Aggregates in Concrete Mr. Suhas S. Malkhare1, Prof. Atul B. Pujari2 1PG Student, 2Asst. Professor, Department of Civil Engineering, KJEI‟s K. J. College of Engineering and Management Research,-Pune, Maharashtra, India, Corresponding Author: Mr. Suhas S. Malkhare

More

5 IV April 2017 doi.org/10.22214/ijraset.2017

the percentage of copper slag added by weight of fine aggregate up to 30% of replacement of copper slag strength was found to be 45.42 N/mm2 for a design mix 1: 1.4: 2.6 keeping w/c ratio as 0.4[2] Srinivasu, Kranti, Nagasai Saikumar studied on compressive strength properties and effects of copper slag as partial replacement

More

Introduction: Experimental program: Cement Coarse ...

2016-3-16  Replacement of copper slag in fine aggregate reduces the cost of making concrete. References: [1] Brindha, D and Nagan, S (2010). “Utilization of copper slag as a partial replacement of fine aggregate”. International Journal of Earth Sciences and Engineering,Vol.3, No.4, pp.579-585 [2] Shi C, Meyer C, Behnood A.

More

Utilization of Copper Slag as Fine Aggregate in

Utilization of Copper Slag as Fine Aggregate in Cement Concrete In the present scenario, as a result of continuous growth in population, rapid industrialization and the accompanying technologies involving waste disposal, the rate of discharge of pollutants into the atmosphere, copper slag is one of the industrial waste which comes out from ...

More

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

2017-5-2  copper slag as fine aggregate in high strength concrete” Materials and Design. 7. Behnood A (2009), Mechanical properties of high-strength concrete incorporating copper slag as coarse aggregate. Construction and Building Materials 8. Gorai B, Jana RK, Premchand (2003), Characteristics and utilization of copper slag - a review. Resources.

More

A REVIEW ON UTILIZATION OF COPPER SLAG IN

2017-5-14  Copper slag can be used as fine aggregate in concrete ... concrete mixtures made with copper slag [16, 17]. Also, up to 15% by weight of copper slag was used as Portland cement replacement together with up to 1.5% of hydrated lime as an activator to pozolanic reactions and the results ... A Review on Utilization of Copper Slag for various ...

More